Changing-room bench, cabinet base 0.8 m

Changing-room bench, cabinet base ŁP/800 is a frame with a width of 800 mm, on which a clothing locker is placed. The structure is made of closed profile 30 × 30 mm, and the seat consists of wooden slats finished with clear lacquer. The bench is permanently fixed.

A cabinet raised above the floor does not get wet when the floor is washed, and the floor beneath can be cleaned without moving the furniture.

ŁP/800 — technical data

Locker base — why use one

A clothing locker standing directly on the floor soaks up water every time the floor is washed, and the lower edge of the body corrodes from underneath, where nobody sees it. The base lifts the locker and eliminates this contact.

The second reason is organisational: a bench by the locker provides a place to sit exactly where the employee changes. Without it people sit on the threshold or balance on one leg, which ends in falls when taking off work footwear.

Fixed or pull-out bench

A fixed base is simpler and cheaper, but takes up space in front of the locker all the time. A pull-out bench slides under the locker and comes out only while changing.

The deciding factor is the width of the aisle between the rows of lockers. Below one and a half metres a fixed bench blocks circulation — in that case the pull-out version is the only sensible choice.

Construction and finish

The steel elements are powder coated with epoxy-polyester paints. The heat-cured coating withstands cleaning agents and everyday rubbing without dulling, unlike wet-applied paint.

The wooden elements — the seat slats — are finished with clear lacquer. Wood does not get cold like metal and does not deform under load, which is why it is used in changing rooms instead of sheet metal or plastic.

The standard colour is RAL 7035 (light grey) — a neutral shade that does not dominate the interior. Four additional colours from the RAL palette are available at no extra cost, and other shades are priced individually.

The furniture comes to you straight from the manufacturer, with no intermediaries. Hence a lead time measured in weeks rather than days, and hence the option of matching the colour to the equipment you already have.

Ordering and selection

KART-MAP line products are made to order, not taken from stock. This means a longer lead time, but also the option of choosing the colour and variant — you do not buy whatever happens to be left in stock.

If you are not sure which size or variant suits your equipment, write or call before placing the order. Adjusting the size at the order stage is free of charge, whereas an exchange after production is not.

Where it works well

• Primary use — staff changing rooms
• Production plants — staff facilities and workstations
• Public institutions — schools, offices, sports facilities
• Retail and services — back-of-house and customer service areas

Related products

You will find the other sizes and variants in the category of this product group. Lockers for changing rooms and staff rooms are collected in industrial cabinets and clothing lockers, and the manufacturer's full range in the KART-MAP line.

Frequently asked questions about ŁP/800

How do I know which width to choose?

The width must match the locker the element goes under. This model is 800 mm — check the width of your clothing locker body and choose the matching value.

What colour is this product?

What colours is the cabinet available in?

What is the lead time?

Standard is 3–7 weeks. From November to January the lead time may be longer due to the higher volume of orders.